How to read a food label
A food label is there so you can decide, in a few seconds, whether a pack is right for you. That might mean calories, salt or sugar, or whether it contains an allergen you need to avoid. The layout changes from country to country, but the useful parts are usually the same: the name of the food, the ingredients, any allergen emphasis, a date mark, and a nutrition table.
This guide walks through those parts in the order that actually helps in a shop. It is not medical advice. If you have an allergy or a condition that depends on diet, follow the advice you have been given, and still read the pack in your hand, because recipes change.
Start with the name and the date
The name on the front of the pack is often marketing. The legal name and the ingredients list on the back tell you what is actually in it. Check the date mark at the same time. In the UK, a use-by date is about safety, and food should not be eaten after that date. A best-before date is about quality. That distinction is set out in official UK food-labelling guidance.
Read the ingredients list
On prepacked food in the UK and the EU, ingredients must be listed in descending order of weight at the time the product was made, under a heading that includes the word “ingredients”. The first items are what the food is mostly made of. If sugar, oil or salt sit near the top, that is a clearer signal than any claim on the front of the pack.
The same rule is why two similar sauces can look alike on the shelf and be quite different once you compare the lists. Spend your time here before you spend it on the nutrition table.
How to check for allergens
The rules differ by country, so read the label for the market you are in, not a screenshot from another country.
In the UK, food businesses must tell you if any of 14 allergens are an ingredient. Those allergens are:
- celery
- cereals containing gluten, including wheat, rye, barley and oats
- crustaceans, including prawns, crab and lobster
- eggs
- fish
- lupin
- milk
- molluscs, including mussels and squid
- mustard
- peanuts
- sesame
- soybeans
- sulphur dioxide or sulphites at levels above 10 mg per kilogram or per litre
- tree nuts, such as almonds, hazelnuts, walnuts, cashews, pecans, pistachios, Brazil nuts and macadamia nuts
On prepacked food, those allergens must be emphasised in the ingredients list, often in bold, italics or a different colour. For loose food, such as a bakery counter or a meal served in a restaurant, the information can be given in writing or verbally, but if it is given verbally the business must also tell you where you can find it in writing.
In the United States, packaged foods must declare the nine major food allergens: milk, eggs, fish, crustacean shellfish, tree nuts, peanuts, wheat, soybeans, and sesame. Sesame became the ninth major allergen under the FASTER Act, with the labelling requirement in effect from 1 January 2023.
Two lines on a pack often cause confusion. A “may contain” or “not suitable for” warning is precautionary. In the UK it is not a legal requirement, and it refers to possible cross-contamination, not to an ingredient that is definitely in the recipe. A “free-from” claim is different: businesses that use it must follow strict processes to keep that allergen out. A vegan label is not a guarantee that a food is free from a particular allergen. If you react to something that is not on the official list, you still need the full ingredients list, or to ask staff when the food is sold loose.
How to read the nutrition table
Start with the serving size and the number of servings in the pack. On a US Nutrition Facts label, every calorie and nutrient figure refers to that serving, not necessarily to the whole pack. The serving size is a typical amount people eat or drink. It is not a recommendation of how much you should eat.
The US Food and Drug Administration uses a simple rule of thumb for the percent Daily Value (%DV): 5% DV or less of a nutrient per serving is considered low, and 20% DV or more is considered high. The same label is designed to help you get less of saturated fat, sodium and added sugars, and more of dietary fibre, vitamin D, calcium, iron and potassium. A 2,000-calorie day is used as general nutrition advice. Your own needs may be higher or lower.
If you eat two servings, you need to double those numbers. Some larger packs also show a second column for the whole package, which is there for exactly this reason.
Packs sold in the EU, the UK and Norway usually show nutrition per 100 g or 100 ml, and often also per portion. The per 100 g column is the fairest way to compare two similar products, because the portion sizes printed on pack are not always the same. Front-of-pack traffic lights, where they appear, are a quick steer, not a substitute for the table.
When the print is tiny, or you are in a hurry
None of this is difficult, but it is easy to miss on a cramped label, in a poorly lit aisle, or when you are comparing several packs. Scanning the barcode is a practical way to pull up the ingredients, allergen and additive information already on record for a supported product, then check it against the pack in your hand.
That only helps if the record matches the pack. Product recipes change, and not every barcode is covered, so treat the phone as a helper, not as a replacement for the label.
If you want to try that in a shop, Scan IQ is built for this. It scans a supported barcode and shows available ingredient, allergen and additive information for food, cosmetic and household products.
Sources
- US Food and Drug Administration, How to Understand and Use the Nutrition Facts Label
- US Food and Drug Administration, The Lows and Highs of Percent Daily Value
- US Food and Drug Administration, The FASTER Act: Sesame Is the Ninth Major Food Allergen
- GOV.UK, Understanding food labelling: Overview
- GOV.UK, Understanding food labelling: Allergen labelling
- GOV.UK, Labelling guidance for prepacked for direct sale (PPDS) food products, on the ingredients list and Article 18 of the Food Information to Consumers rules